Petrol Post Driver 4 Stroke Pile Star Picket Steel Post Fence Rammer Hole
Kingtech Petrol Post Driver provides efficient and stable drilling, super impact, knocks wood posts into the ground in just seconds, perfect for driving posts and fence posts.
It has a maximum power of 1000W, 4-stroke pile driver and has a high impact hammer action of 1500-2300BPM. It can drive a post, stake or nail into the ground in seconds, replacing the traditional. The piling method is more efficient and no longer has to struggle with posts, nails or stakes.
This powerful tool is equipped with a new engine and when in use, it produces low noise and good stability. This Hand-held piling machine is suitable for orchard supports, farm fences, highway guardrails, photovoltaic power stations, gardens, construction sites and other places.
It includes 20-45mm, 55mm and 80mm sleeves.
Features
• Heavy-duty and easy-to-use post driver, designed to knock posts up to 80mm diameter in to the ground.
• Powered by a lightweight, compact and powerful 4-stroke 37.7cc air cooled single cylinder engine.
• Hand pull start and an oil capacity of 0.65L. Supplied complete with storage case for easy transport, as well as full tool kit.
• Offers significant weight saving over other models, allowing easier single operator use and duration. Supplied with three sets of piling socket sleeves: 20-45mm, 55mm and 80mm, allowing the machine to be used with a wide range of diameter posts.
• Especially useful when installing large numbers of posts, or where accessibility is restricted for heavier machinery
Specifications
Engine type: Gasoline 4-stroke
Displacement: 37.7CC
Fuel: Unleaded gasoline 90# or above
Oil level: 0.08L
Oil can capacity: 0.65L
Max power and rotate speed: 1KW/6500r/min
Max torque and rotate speed: 1.65N.m/5500r/min
Max no-load rotate speed: 8500r/min
Idle speed: 3000±250r/min
Fuel consumption rate: ≤480g/kW.h
Oil consumption rate : ≤1.2g/kW.h
Impact frequency: 1500~2300BPM
Impact energy: 20~45J
Starter system: Hand pull start
Pile specification: 20-80mm
In the Box
1 x Post Driver
1 x Carry Case
1 x 20-45mm Driver Sleeve
1 x 55mm Driver Sleeve
1 x 80mm Driver Sleeve
1 x Tool kit
| Supplier SKU | V379-POSTDRVR377001 |
|---|---|
| Number of Package | 1 |
| Package Depth | 1 |
| Package Width | 1 |
| Package Length | 1 |
| exclusions | Due to the size of this product, we are unable to deliver to the following post codes: This item is only delivered to Melbourne, Sydney, Adelaide & Brisbane |